Listings -> Crafts -> Ceramics, Pottery -> Ceramic Decals







Highlighted Listings


eBay API Price Bids Time Left

7 Dogs Dogs Decals Glass Transfers 2" --> [link]$2.99-Ended
7 Glass Fire Decals These Decals are 2" in size. Fires Opaque on glass to cone 022 Water Release. Multiples available on some auctions. Enhance Ceramic, Wood, Lamp Shades, candles, soap, plastic, vinyl, metal, polished stone and Much Much More!! Use On Ceramic 1. Trim desired decal and place into warm water until it curls. Decal will then flatten and release from white paper back. 15/20 seconds 2. Remove decal from water, insure it is removed from white paper backing. 3. Lightly wet the area to be decorated, place decal on piece and slide to adjust position. 4. Eliminate any excess water and air bubbles from behind decal using a squeegee. 5. Let piece dry for 24 hours, at room temperature. 6. Kiln fire to cone 015, 016 or 017 for regular decal and cone 018 for gold decals. Use On Wood 1. Mix a solution of Glycerin and Elmers glue. (1/2 & 1/2) 2. Wood pieces can be natural, stained or painted. 3. Apply small amount of glue mixture and spread over the area to be decorated. 4. Trim desired decal and place into warm water until it curls. Decal will then flatten and release from white paper back. 15/20 seconds 5. Remove decal from water, insure it is removed from white paper backing. 6. Place decal in desired area and eliminate any excess water and glue from behind decal using a squeegee. 7. Remove excess water and glue from outside of decal using a damp paper towel. 8. Let piece dry for 24 hours, at room temperature. 9. Apply a water based sealer. Several coats may be required to cover outline of decal. Use On Lamp Shades 1. Trim desired decal and place into warm water until it curls. Decal will then flatten and release from white paper back. 15/20 seconds 2. Remove decal from water, insure it is removed from white paper backing. 3. Dry decal with paper towel. 4. Apply Tacky Glue to back of dry decal. 5. Place decal, glue side down, on lamp shade. 6. Eliminate any excess glue from behind decal using a squeegee. 7. Let piece dry for 24 hours, at room temperature. 8.Can spray with a matte porcelain sealer to seal and eliminate shine of decal. This will give it a linen look. Let your imagination uncover the many ways these decals can en...

4 Horse Horses Decals Glass Transfers 2" --> [link]$1.99-Ended
4 Glass Fire Decals These Decals are 2" in size. Fires Opaque on glass to cone 022 Water Release. Multiples available on some auctions. Enhance Ceramic, Wood, Lamp Shades, candles, soap, plastic, vinyl, metal, polished stone and Much Much More!! Use On Ceramic 1. Trim desired decal and place into warm water until it curls. Decal will then flatten and release from white paper back. 15/20 seconds 2. Remove decal from water, insure it is removed from white paper backing. 3. Lightly wet the area to be decorated, place decal on piece and slide to adjust position. 4. Eliminate any excess water and air bubbles from behind decal using a squeegee. 5. Let piece dry for 24 hours, at room temperature. 6. Kiln fire to cone 015, 016 or 017 for regular decal and cone 018 for gold decals. Use On Wood 1. Mix a solution of Glycerin and Elmers glue. (1/2 & 1/2) 2. Wood pieces can be natural, stained or painted. 3. Apply small amount of glue mixture and spread over the area to be decorated. 4. Trim desired decal and place into warm water until it curls. Decal will then flatten and release from white paper back. 15/20 seconds 5. Remove decal from water, insure it is removed from white paper backing. 6. Place decal in desired area and eliminate any excess water and glue from behind decal using a squeegee. 7. Remove excess water and glue from outside of decal using a damp paper towel. 8. Let piece dry for 24 hours, at room temperature. 9. Apply a water based sealer. Several coats may be required to cover outline of decal. Use On Lamp Shades 1. Trim desired decal and place into warm water until it curls. Decal will then flatten and release from white paper back. 15/20 seconds 2. Remove decal from water, insure it is removed from white paper backing. 3. Dry decal with paper towel. 4. Apply Tacky Glue to back of dry decal. 5. Place decal, glue side down, on lamp shade. 6. Eliminate any excess glue from behind decal using a squeegee. 7. Let piece dry for 24 hours, at room temperature. 8.Can spray with a matte porcelain sealer to seal and eliminate shine of decal. This will give it a linen look. Let your imagination uncover the many ways these decals can en...

9 Cat Cats Kitten Decals Glass Transfers 2" --> [link]$2.99-Ended
9 Glass Fire Decals These Decals are 2" in size. Fires Opaque on glass to cone 022 Water Release. Multiples available on some auctions. Enhance Ceramic, Wood, Lamp Shades, candles, soap, plastic, vinyl, metal, polished stone and Much Much More!! Use On Ceramic 1. Trim desired decal and place into warm water until it curls. Decal will then flatten and release from white paper back. 15/20 seconds 2. Remove decal from water, insure it is removed from white paper backing. 3. Lightly wet the area to be decorated, place decal on piece and slide to adjust position. 4. Eliminate any excess water and air bubbles from behind decal using a squeegee. 5. Let piece dry for 24 hours, at room temperature. 6. Kiln fire to cone 015, 016 or 017 for regular decal and cone 018 for gold decals. Use On Wood 1. Mix a solution of Glycerin and Elmers glue. (1/2 & 1/2) 2. Wood pieces can be natural, stained or painted. 3. Apply small amount of glue mixture and spread over the area to be decorated. 4. Trim desired decal and place into warm water until it curls. Decal will then flatten and release from white paper back. 15/20 seconds 5. Remove decal from water, insure it is removed from white paper backing. 6. Place decal in desired area and eliminate any excess water and glue from behind decal using a squeegee. 7. Remove excess water and glue from outside of decal using a damp paper towel. 8. Let piece dry for 24 hours, at room temperature. 9. Apply a water based sealer. Several coats may be required to cover outline of decal. Use On Lamp Shades 1. Trim desired decal and place into warm water until it curls. Decal will then flatten and release from white paper back. 15/20 seconds 2. Remove decal from water, insure it is removed from white paper backing. 3. Dry decal with paper towel. 4. Apply Tacky Glue to back of dry decal. 5. Place decal, glue side down, on lamp shade. 6. Eliminate any excess glue from behind decal using a squeegee. 7. Let piece dry for 24 hours, at room temperature. 8.Can spray with a matte porcelain sealer to seal and eliminate shine of decal. This will give it a linen look. Let your imagination uncover the many ways these decals can en...

25th Anniversary Silver Decals Ceramic Transfers 8" --> [link]$1.99-Ended
1 Decal This Decal is 8" in size. Fires Silver to cone 019 Water Release. Multiples available on some auctions. Enhance Ceramic, Wood, Lamp Shades, candles, soap, plastic, vinyl, metal, polished stone and Much Much More!! Use On Ceramic 1. Trim desired decal and place into warm water until it curls. Decal will then flatten and release from white paper back. 15/20 seconds 2. Remove decal from water, insure it is removed from white paper backing. 3. Lightly wet the area to be decorated, place decal on piece and slide to adjust position. 4. Eliminate any excess water and air bubbles from behind decal using a squeegee. 5. Let piece dry for 24 hours, at room temperature. 6. Kiln fire to cone 015, 016 or 017 for regular decal and cone 018 for gold decals. Use On Wood 1. Mix a solution of Glycerin and Elmers glue. (1/2 & 1/2) 2. Wood pieces can be natural, stained or painted. 3. Apply small amount of glue mixture and spread over the area to be decorated. 4. Trim desired decal and place into warm water until it curls. Decal will then flatten and release from white paper back. 15/20 seconds 5. Remove decal from water, insure it is removed from white paper backing. 6. Place decal in desired area and eliminate any excess water and glue from behind decal using a squeegee. 7. Remove excess water and glue from outside of decal using a damp paper towel. 8. Let piece dry for 24 hours, at room temperature. 9. Apply a water based sealer. Several coats may be required to cover outline of decal. Use On Lamp Shades 1. Trim desired decal and place into warm water until it curls. Decal will then flatten and release from white paper back. 15/20 seconds 2. Remove decal from water, insure it is removed from white paper backing. 3. Dry decal with paper towel. 4. Apply Tacky Glue to back of dry decal. 5. Place decal, glue side down, on lamp shade. 6. Eliminate any excess glue from behind decal using a squeegee. 7. Let piece dry for 24 hours, at room temperature. 8.Can spray with a matte porcelain sealer to seal and eliminate shine of decal. This will give it a linen look. Let your imagination uncover the many ways these decals can enhance most projects!!! ...

8 Long Stem Yellow Rose Decals Ceramic Transfers 4" --> [link]$1.991Ended

9 Cactus Plant Decals Ceramic Transfers 2" & 3" --> [link]$1.99-Ended

100 Texas Western Poem Decals Ceramic Transfers 2" & 1" --> [link]$5.99-Ended

60 Western Etc Decals Ceramic Transfers 2" --> [link]$5.99-Ended

100 Angel Seashell Etc Decals Ceramic Transfers 1" --> [link]$5.99-Ended

CHERRY JUBILEE CERAMIC WALL ORNAMENT COLLECTABLE!!!!!!! --> [link]$10.00-Ended

DARTHVATER --> [link]$3.00-Ended

HONSOLO --> [link]$3.00-Ended

LUKE SKYWALKER --> [link]$3.00-Ended

PRINCESS LIEA --> [link]$3.00-Ended

TEACHER MUSICAL WATERBALL-WORKING --> [link]$1.99-Ended

Little bit of this & that Vintage deco 200+decals WOWZA --> [link]$9.99-Ended

Miss Piggy Porcelain W/Studs --> [link]$19.50-Ended

TRAINS AND OLD TYME CAR CERAMIC DECALS 32 --> [link]$5.00-Ended

PAGE OF COLORFUL CHRISTMAS TREE CERAMIC DECALS 4 SANTAS --> [link]$5.00-Ended

CERAMIC DECAL- 4 CATS IN THE FISH BOWL- 4 INCHES --> [link]$1.99-Ended

CERAMIC DECAL- 6 STRAWBERRIES & FLOWERS- 2 INCHES --> [link]$1.69-Ended

CERAMIC DECAL- 4 STRAWBERRY SPRAY- 2 X 4 1/2 INCHES --> [link]$1.69-Ended

CERAMIC DECAL- 4 - BEAUTIFUL ORCHIDS - 2 X 3 1/2INCHES --> [link]$1.99-Ended

CERAMIC DECAL- 4 - LAVENDER FLORAL SPRAY -3X2 1/2INCHES --> [link]$1.99-Ended

CERAMIC DECAL- 4 CHERRY BUNCHS - 2 1/2 x 3 INCHES --> [link]$1.49-Ended

CERAMIC DECAL- 4 INDIAN CHIEF WITH ANIMALS- 3 INCHES --> [link]$1.69-Ended

CERAMIC DECAL- 8 INDIAN MAIDEN - 2X 2 INCHES --> [link]$1.99-Ended

CERAMIC DECAL-4 ORKA WHALES -2 1/2 INCHES ROUND --> [link]$1.99-Ended

CERAMIC DECAL- LOT OF VICTORIAN TULIP FLOWERS - 1-2-3" --> [link]$2.99-Ended

Ceramic Decals Sea Shells 2 inch --> [link]$0.99-Ended

Ceramic Decals Southwest Skull/Feathers 2 inch --> [link]$0.99-Ended



Category Link Tree



Category Index Pages



Learn more about these pages or read the disclaimer

eBay and the eBay Logo are trademarks of eBay, Inc.

Generated: 2005-08-14 00:06:13


Warning: main(/home/httpd/vhosts/aimlesswords.com/httpdocs/bot-detect-script-inc-mysql.php) [function.main]: failed to open stream: No such file or directory in /home2/bluewill/public_html/aimlesswords/ebay_bottom.php on line 5

Warning: main() [function.include]: Failed opening '/home/httpd/vhosts/aimlesswords.com/httpdocs/bot-detect-script-inc-mysql.php' for inclusion (include_path='.:/usr/php4/lib/php') in /home2/bluewill/public_html/aimlesswords/ebay_bottom.php on line 5